|Place of Origin:||Zhangjiagang, China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||covered by PE films|
|Delivery Time:||50 working days|
|Supply Ability:||40 sets per year|
|Raw Material:||PET Preform||Cacity Number:||4|
|Voltage:||Customer Oriented||Automation:||Fully Automatic|
|Color:||Customer Oriented||Controller:||PLC Controller|
plastic container manufacturing machine,
bottle blow moulding machine
4000BPH fully automatic PET bottle blowing machine with 4 cavity
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safe,reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install,test and start up.
14). Low rejection rate: less than 0.2 percent.
Generally introduction of the FG-A4 blowing machine:
FGA4 Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Main parameter of the FG-A4 blowing machine:
|Productivity||Depend on the bottle design||3200-4000BPH|
|Product type||Volumn||Max 2L|
|Body diameter||Max 100mm|
|Neck diameter||Max 38mm|
|Main machine power||Rated power||49kw|
|Really use power||13kw|
|Electrical power||Customer oriented|
|Air system||HP air compressor||2.4m3/min, 3Mpa|
|LP air compressor||2.0m3/min, 1Mpa|
|Air tank||0.6m3, 3Mpa|
|Air dryer||2.0m3/min, 3Mpa|
|Cooling water||Water chiller||3HP|
Welcome to visit our factory !
Contact Person: Mr. Figo Hussian