|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||wooden case ,film packing|
|Delivery Time:||90days after payment|
|Material:||Stainless Steel||Plastic Material:||PET|
bottle blow moulding machine,
plastic bottle production machine
Fast CE / ISO Automatic Pet Blow Molding Machine With Reasonable Structure
9000bph full automatic pet bottle blowing machine for mineral water
SMART series of blowing machine fills the gaps in field of domestic high-speed linear blowing machine currently.It has our own intellectual property rights, and has obtained more than 13 national patents. This machine is equipped with automatic perform loading and bottle unloading system. It is applicable for all shapes of drinking water bottles, carbonated bottles and hot filling bottles. FG4 is composed of three modules: preform elevator, preform unscrambler and host machine.
1 High speed with reasonable structure:
The unique linkage cam can finish mold-opening, mold-locking and bottom mold-elevating in one movement, the blowing period is greatly reduced to 2 seconds.
The linkage cam is intelligently driven by one servo motor, this obviously simplify the blowing machine structure, which make it convenient to maintain and no need for heavy lubrication work.
2 Less heating oven, small electricity consumption
The preforms distance in the heating oven is only 38.1mm, which means more preforms can be put into the oven compared with the traditional blowing machine. The heating efficiency is largely improved, and as a result, it saves more than 30% electricity consumption than the traditional blowing machine.
3 Stably running
The machine adopts modularized design concept, it has compact and reasonable structure, it reduces the failure rate from the basic design angle. FG4 does not need the low air compressor.
pet bottle blow molding machine parameters
Detail specification of FG-6 PET bottle blowing machine
|Capacity||Depend on bottle design||9000-12000PCS/H|
|Electric consumption||Install power||51kw|
|Heating oven powder||46kw|
|Heating Oven operating power||28kw|
|Air consumption||Pressure||8m3/min 4.0MPa|
|Capacity:9000-12000PCS/H(based on 0.5L)|
|Max. Volume: 2 Litter
Blowing Main machine: 3.6*1.3*2.3m
|Pneumatic part& Cylinder||Valve||GERMAN FESTO|
|Electric part||PLC||JAPAN Mitsubishi|
|Servo System||JAPAN Panasonic|
|Frequency inverter||JAPAN Mitsubishi|
|Operating system||JAPAN Mitsubishi|
|Touch screen||JAPAN Mitsubishi|
|One-way Valve||GERMAN FESTO|
|Throttle Valve||GERMAN FESTO|
|Reducing Valve||GERMAN DURAY|
|Note: All the electrical components adopts CE,UL,CCC approved international
advanced high-tech product
Contact Person: Betty zhang